BridgeWave 80 Series Installation manual Manuel d'installation télécharger pdf (Page 9)

Network Management Manual

580-00511, rev B 9 of 34

2. Connecting to the Unit

BridgeWave products are shipped with the factory default IP address set to

192.168.0.2 for high band units and 192.168.0.1 for low band radios. Configure your

PC (IP Address 192.168.0.3 – 192.168.0.254, Subnet Mask 255.255.255.0) to connect

with the BridgeWave unit.

2.1 Launch your web browser.

2.2 Enter http://192.168.0.1 or http://192.168.0.2

Figure 2-1

2.3 After entering the IP address of the BridgeWave radio unit, the browser should

display the logon screen; enter ’admin’ as the user and ‘adminpass’ as the initial

password.

Figure 2-2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 33 34

Pas de commentaire

BridgeWave 80 Series Installation manual Manuel d'installation Page 9